Below is the direct link to download the Solo Aspire 3 Firmware stock ROM (flash file) this Firmware contains Flash Tool, Driver and instructions.
Take a Backup of your personal data before flashing or installing the firmware on your smartphone.
As this helps you to recover the personal data whenever any thing wrong happen.
SOLO Aspire 3 Firmware Specifications. File To Flash [ stock ROM]
Technology
GSM: GSM 850 / 900 / 1800 / 1900
3G: HSDPA 850 / 2100
4G: No
SIM Type: Micro SIM
OS:
Android 5.1 Lollipop
Design
Dimensions: 144.3 x 73.1 x 9.8 mm
Design
Dimensions: 144.3 x 73.1 x 9.8 mm
Weight:
Display: 5.0 inches, 540 x 960 pixels, IPS display
Sensors: Accelerometer, Proximity
Build: Plastic
Colours: Warm Silver. Soft Gold.
Hardware
Processor Type: Quad-core 1.2 GHz Cortex-A53
Processor Name: Qualcomm MSM8916 Snapdragon 410
Graphics Processor:
RAM: 1 GB
Internal Storage: 8 GB
External Storage: MicroSD card up to 32 GB
Camera
Rear: 8 megapixel autofocus camera with LED flash
Video recording: Yes
Front-facing: 5 megapixel camera
Multimedia
Music Support: mp3, aac, aac+, eaac+, amr
Loudspeaker: Mono
Video Support: mpeg4, h.263, h.264
FM Radio:
SOLO Music/SOLO View: Unlimited access to 20,000+ songs and movies
Connectivity
Bluetooth: Yes
WiFi: Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
GPS: Yes
USB: microUSB
Miscellaneous
Battery: 2000 mAh
You Might Also Like:
All Solo Firmware Link here
Download SP flash Tool From here
Download Spreadtrum Flashing Tool from Here
After extracting you will find the SP Flash Tool, Driver and instruction manual.
Install the USB Drivers (skip if drivers are already installed).
Open the SP Flash Tool and load the Scatter File from the firmware folder.
Connect your Smartphone to the computer using the USB Driver.
Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Green Ring will appear at the end of successful Flash.
See Detailed instruction with images On how to Use sp Flash Tool
Recommended:
Learn How to Flash Mediatek device From Here
Battery: 2000 mAh
You Might Also Like:
All Solo Firmware Link here
Download SP flash Tool From here
Download Spreadtrum Flashing Tool from Here
HOW TO FLASH SOLO ASPIRE 3?
Download and extract the stock firmware on your computer.After extracting you will find the SP Flash Tool, Driver and instruction manual.
Install the USB Drivers (skip if drivers are already installed).
Open the SP Flash Tool and load the Scatter File from the firmware folder.
Connect your Smartphone to the computer using the USB Driver.
Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Green Ring will appear at the end of successful Flash.
See Detailed instruction with images On how to Use sp Flash Tool
Recommended:
Learn How to Flash Mediatek device From Here
Download more Mediatek Firmware from here
SOLO Aspire 3 Firmware / Stock ROM
Aspire3.fwvga.64+8.b1b8_app_V004_20161031
Android 6.0
MT6580
No comments:
Post a Comment